Leering Hengelo introduces new generation of Normfinish® blast cabinets Normfinish blast cabinets, an institution in the world of blast and surface treatment technology, have been completely overhauled as of 1
Normfinish® AM Tumbler XL; efficient, careful finishing of serial 3D products
Serial production is increasing in the AM industry, which creates new requirements for the finishing process. The Normfinish AM Tumbler XL offers a solution. Especially designed for blasting series of
Normfinish AM Tumbler XL; efficient, careful finishing of 3D printed products
3D-printed products often have to be finished after the fact in order to remove the powder, make the product glossy and/or add a certain structure/roughness. For this process, we have
Automatic blasting of airplane components
The production of airplane components is subject to strict regulations and approvals by several end customers. This also applies to a possible blasting process and must therefore be considered when
Impossible? Scraper floor with height of 100 mm*!
Leering Hengelo recently supplied a blast room to a customer with several European offices, who specialises in the industrial cleaning of all sorts of products. They needed a blast room
Warning: prevent fire extinguishers from rusting!
Fire extinguishers filled with water will corrode from the inside, which leads to reduced operational safety. A coating on the inside will solve this problem. This solution requires a good
Solution for finishing 3D-printed products in series
Several years ago, a client of Leering Hengelo started 3D printing small parts in which a titanium alloy was applied. Blasting the 3D-printed parts is required to finish these products;